4 Setting up for an Inspection
In order to set up for an inspection, you need to:
1. Select a Sensor Type.
2. Acquire a good image.
3. Set parameters depending on the Sensor Type.
4.1 Selecting a Sensor Type
When you exit Demo Mode, the sensor reboots with a single inspection with a Match sensor type by default. To change the Sensor Type:
1. Go to Main Menu > Inspection > Properties > Sensor Type
This displays the Sensor Type menu options.
2. Select either Area , Blemish, Match, or Sort.
3. Click the Home Screen icon in the upper-left corner of the screen to return to the Home screen.
Online Only - rev. B
www.bannerengineering.com - tel: 763-544-3164
51
