Banner iVu Plus TG Series Instruction Manual Download Page 113

Page: 113 / 241

5. Get the pattern names that are stored in the iVu device.

get sort_result patternnames

\x0D\x0A

OK\x0D\x0A

"pattern_1","pattern_2"x0D\x0A

How to Execute a Product Change Using the Command Channel

1. Make sure that the Command Channel is enabled using either Ethernet or Serial I/O ( Main Menu > System >

Communications > Command Channel > Connection ).

2. Get all the stored inspection names.

get productchange inspectionnames

\x0D\x0A

OK\x0D\x0A

"Inspection 1", "Inspection 2", "Inspection 3"\x0D\x0A

3. Execute a product change.

do productchange "inspection2"

\x0D\x0A

OK\x0D\x0A

4. Check that the inspection passed.

get inspection status

\x0D\x0A

OK\x0D\x0A

Pass\x0D\x0A

How to Reboot the

iVu

Using the Command Channel

1. Make sure that the Command Channel is enabled using either Ethernet or Serial I/O ( Main Menu > System >

Communications > Command Channel > Connection ).

2. Issue a reboot command as follows:

do system reboot

\x0D\x0A

(No response received)

Note: It is normal to not get a response in this case. If the command was issued incorrectly, the response

would be an error.

14.4.4 Command Channel Reference

Info Command Group

Command

Group

Item

Description

Get

Info

CompanyName

The company name as a string.

Get

Info

ModelNumber

The device model number as a string.

Get

Info

FirmwareVersion

The device firmware version as a string.

Get

Info

SerialNumber

The device serial number as a string.

Get

Info

Name

The device name as a string.

Get

Info

BootNumber

The number of device bootups.

Get

Info

UpTimer

The elapsed time the device has been running. The format is
hh:mm:ss:msec.

Get

Info

HourCount

The number of hours the device has been running.

Get

Info

RemoteConnected

The remote display connected status as a Boolean value (true or false).

Get

Info

RemoteModelNumber

The model number of the remote display as a string.

Get

Info

RemoteSerialNumber

The serial number of the remote display as a string.

iVu Plus TG and Color Gen2 Image Sensors

www.bannerengineering.com - Tel: + 1 888 373 6767

113

Summary of Contents for iVu Plus TG Series

















































































































































































































































Search results

Summary of Contents for iVu Plus TG Series

Reviews:

Brands by name

Popular brands

Banner iVu Plus TG Series, Instruction Manual

Search results

Summary of Contents for iVu Plus TG Series

Reviews:

Brands by name

Popular brands