P/N 64118 rev. B
Specifications
10
Banner Engineering Corp.
•
Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Status Indicators
Power Requirements
16 to 30V dc @ 1.0 A (typical: 0.5 A @ 16V dc)
Output 1 (red):
Lights to indicate Discrete Output #1 is active
Alarm (red):
Lights to indicate Discrete Output #2 is active
Gate (red):
Lights to indicate GATE input is active
Align (green):
Lights to indicate emitter and receiver are aligned
Diagnostics indicator:
(Key on controller side label) Identifies System errors and status
Inputs
Sensor input:
Emitter and receiver wire in parallel to five terminals.
Gate input:
Optically isolated, requires 10 to 30V dc (7.5k
Ω
impedance) for gate signal
Remote alignment input:
Optically isolated, requires 10 to 30V dc (7.5k
Ω
impedance) for alignment
sequence signal
Discrete (Switched) Outputs
NPN outputs:
Open collector NPN transistor rated at 30V dc max., 150 mA max.
PNP outputs:
Open collector PNP transistor rated at 30V dc max., 150 mA max.
All discrete outputs:
OFF-state leakage current:
< 10 µA @ 30V dc
ON-state saturation voltage:
< 1V @ 10 mA and < 1.5V @ 150 mA
Serial Data Outputs
RS-232 or RS-485 interface. (Up to 15 control modules may be given unique addresses on one RS-485
party line.)
ASCII or binary data format
9600, 19.2K, or 38.4K baud rate
8 data bits, 1 stop bit, and even, odd, or no parity
Analog Outputs
Voltage-sourcing outputs:
0 to 10V dc (25 mA current limit)
Current-sinking outputs:
4 to 20 mA (16 to 30V dc input)
Resolution:
Span / Number of sensing channels
Linearity:
0.1% of full scale
Temperature variation:
0.01% of full scale per °C
System Programming
Via RS-232 interface to PC-compatible computer running Windows®
XP, Vista, or 7
and using
software supplied with each control module.
Construction
Polycarbonate housing; mounts to flat surface or directly onto 35-mm DIN rail
Environmental Rating
Control Module:
NEMA 1, IEC IP20
Emitter/Receiver:
NEMA 4, 13; IEC IP65
Output Configuration
MAHCVP-1:
Two PNP discrete (switched), two 0-10V voltage sourcing
MAHCVN-1:
Two NPN discrete (switched), two 0-10V voltage sourcing
MAHCIP-1:
Two PNP discrete (switched), two 4-20 mA current sinking
MAHCIN-1:
Two NPN discrete (switched), two 4-20 mA current sinking
2.2 Control Module Specifications
Operating Conditions
Temperature:
0° to +50°C (+32° to 122°F)
Maximum relative humidity:
95% @ 50°C (non-condensing)
Certifications
