5
>> Understanding the guide
If you have a Beo4 remote control with
navigation button, you use the
centre
button with up, down, left and right
movement to navigate in menus. Press
in the middle of the
centre
button to
confirm selections and settings in
menus.
Bring up the menu overlay by pressing
MENU
while the television is on.
To back up through menus, press
BACK
.
To exit menus, press and hold
BACK
.
Note that your Beo4 remote control
must be set to
MODE 1
, see ‘
How do I…
’
in Getting Started. You cannot use a
Beo4 remote control without navigation
button.
Beo4 with navigation button
Beo6
If you operate your television with the
Beo6 remote control, you use the
centre
button with up, down, left and right
movement to navigate in menus. Press
in the middle of the
centre
button to
confirm selections and settings in menus.
Bring up the menu overlay by pressing
Menu
while the television is on.
To back up through menus, press
BACK
.
To exit menus, press and hold
BACK
.
Note that a Beo6 should be reconfigured
when you add new products to your setup.
The BeoRemote app allows you to
operate your television with a tablet
and is especially useful for navigating in
web pages or applications using
WebMedia
.*
1
Both your television and
tablet must be on the same network
and WAKE ON WLAN must be set to ON,
see the television NETWORK menu. This
allows you to switch on your television
from standby mode. Note that the
standby power consumption will
increase slightly.
BeoRemote is equivalent to a Beo4
remote control. However, it does not
support all Beo4
LIST
functions.
Tap on the menu icon (
) to open the
television menu. The navigation pad
( ) works as the Beo4 navigation
button. Tap in the middle to select a
setting. Swipe to the list options to
activate television functions.
To back up through menus, tap
.
To exit menus, hold
.
BeoRemote has a short built-in guide
which describes basic functions (found
under SETTINGS).
Note that first-time setup must be
performed using a Beo4/Beo6 remote
control. BeoRemote requires that your
television is set up in a network.
BeoRemote app
ST
OP
PLA
Y
BA
CK
Centre
and
naviga tion
button
Your tablet and your television must be on
the same network to use the BeoRemote
app.
1
*BeoRemote supports tablets with iOS
(most recent iOS version) and Android (3.2
or higher).
iOS
Android
Centre
and
naviga tion
button
