22
HDMI Matrix
The HDMI Matrix itself is a
physical product that can be
connected allowing you to
connect up to 32 external
sources to up to 32 televisions in
different rooms and access the
sources either individually from
each TV or simultaneously from
several rooms via the Beo4/Beo6
remote control.
The HDMI Matrix must be connected
and set up by your Bang & Olufsen
retailer.
– If you use a Beo6 remote control, it must
be reconfigured before you can use the
HDMI Matrix.
– You cannot connect more than one HDMI
Matrix in a setup.
Settings in the HDMI MATRIX menu …
In the HDMI MATRIX menu, you can select
settings for your HDMI Matrix.
Connect an HDMI Matrix…
> Open the HDMI MATRIX menu.
> Highlight MATRIX CONNECTED and use
the navigation button left to open
selection.
> Select an HDMI socket and press the
centre
button twice.
> Download a PUC table for the connected
HDMI source. Follow on-screen
instructions.
> Highlight the downloaded PUC table and
press the
centre
button.
> Select a PUC socket and press the
centre
button.
> Select the control type to be PLUG.
> Select modulation mode.
> Press the
centre
button to store the
HDMI Matrix settings.
> Press the
centre
button to continue.
The HDMI Matrix is now configured. Then
you have to configure the sources
connected to the HDMI Matrix in the
SOURCE LIST SETUP menu. This is done the
same way as other connected equipment.
If you at a later time disable a stored HDMI
Matrix configuration by setting the HDMI
Matrix field to NO, your settings for INPUTS
are still saved. This means that if you enable
the HDMI Matrix, the settings reappear.
To unconfigure a source,
see page 12
.
MENU
SETUP
PRODUCT INTEGRATION
HDMI MATRIX