10
>> Connections
During setup of a source via the SOURCE
LIST SETUP menu, you can select how a
PUC controlled product is connected.
You must select which socket the PUC
cable is connected to (1A, 1B, 2A or 2B).
Then you choose between PLUG (cable)
and IR BLASTER (IR-transmitter). If you
select PLUG, you must choose between
MODULATION ON and MODULATION
OFF. For information about type of cable
and modulation settings, contact your
retailer.
IR-transmitters:
To operate non-Bang &
Olufsen products with a Beo4/Beo6 remote
control, attach a Bang & Olufsen IR-
transmitter on your non-Bang & Olufsen
product and then connect it to one of the
sockets marked PUC on the connection
panel. Attach the transmitter near the IR-
receiver on the connected equipment to
ensure remote control operation. Before
attaching it, check that you can operate the
equipment menus on the television screen
using the Beo4/Beo6 remote control.
For an extra PUC cable, contact your retailer.
For information about download of
Peripheral Unit Controller (PUC) tables for
set-top boxes,
see page 11
and
page 32
.
Control
STB
STB
PLUG
IR