background image

29

Power settings 

If you want to make your 

television start up faster, you can 
set a Quick-Start Timer for one or 
two specified time periods. This 
will increase the standby power 

consumption within these 
periods compared to when the 

television is in ordinary standby. 

On the other hand, you can 
choose to save power on a 
number of other functions in the 

television, such as sound, picture 
and network. When you set up 

power saving for the picture, a 
preview shows you the picture 
quality for each option which 
makes it easier for you to select 

the combination of power 

consumption and quality that 
suits you best. 

In the AUTO STANDBY menu, 

you can set the television to 
switch off automatically after 
some time without operation.

Set up the power consumption for 

standby, sound, picture, and network. 

The television can be set to switch itself 

to standby after some time without 
operation. The factory setting is 4 hours. 

This function only applies in video mode, 

not in audio mode. 

To reduce the start-up time or set up auto 

standby, bring up the STANDBY menu.*

1

 

To make power saving settings for sound, 

bring up the SOUND menu.

To make power saving settings for picture, 

bring up the PICTURE menu.

To make power saving settings for network, 

bring up the NETWORK menu.

When AUTO STANDBY is activated, a message 

appears on your television screen if the 

television has not been operated during the 
time set in the menu. The television then 
switches to standby if you do not operate it. 

When no source signal has been detected 
for 15 minutes, the television is switched to 

standby. 

1

*If a Quick-Start Timer is active, the standby 

indicator will light solid green briefly and 

your television will switch on within seconds.  
If you receive your television signal from  

a connected set-top box, the television 
start-up time is also affected by the start-up 
time of the box. Setting a Quick-Start Timer 

will increase the power consumption within 

the specified period. 

Set up the power consumption 

MENU

   

   SETUP 

 

 

    POWER SAVING 

 

 

      STANDBY 

 

 

      SOUND 

 

 

      PICTURE 

 

 

      NETWORK 

 

 

      … 

 

 

Summary of Contents for BEOPLAY V1 Series







































Reviews: