Bang & Olufsen BeoLab 3500, User Manual

Page: 6 / 24

6
B E O 4 R E M O T E O P E R A T I O N
The Beo4 remote control* gives you the full
benefit of your BeoLab 3500.
When you operate the BeoLab 3500 close-up,
you will either switch on a source that was last
playing in your main Bang & Olufsen system,
or you will listen-in on a source that is
currently playing.
The Beo4 remote control enables you to switch
on to the exact source you wish to listen to
from your main Bang & Olufsen system (audio
or video), and to control the daily playback
functions for that source.
The daily playback functions are carried out
just as if you were operating your main system
directly, using the Beo4 remote control.
With Beo4, you are given the opportunity to
make a Wake-up Timer on BeoLab 3500 which
is executed separatedly, regardless of whether
you have included BeoLab 3500 in a Timer
Play programming or not – which, via your
main room system, switches all linked products
on automatically at a certain time to a certain
source.
Furthermore, the Beo4 is the key to adjusting
the sound for the BeoLab 3500 speakers
separately.
See how on the next few pages…
Any operation you carry out using the Beo4
remote control is received by your BeoLab
3500. Via your BeoLink installation, the
BeoLab 3500 communicates your instruction to
your main Bang & Olufsen system.