Bang & Olufsen BeoLab 3500, User Manual

Page: 14 / 24

14
BeoLab 3500 and Timer Play…
If you have programmed your main Bang &
Olufsen system to start playing automatically
(a Timer Play programming), for example to
wake you up in the morning, the BeoLab 3500
speakers can be included as well.
You can cancel the Timer Play function locally,
so that the BeoLab 3500 will not be included:
• Touch the TIMER key and you will see the
current Timer setting of the BeoLab 3500 in
the display
• While the current setting is displayed, touch
the TIMER key again to change the function
from Timer On (timer play) to No Timer (no
timer play), or vice versa.
Note: The Timer Play function is not available
in all Bang & Olufsen systems. Please refer to
the User's guide for your main room A/V
system.
Remote operation of Timer Play and
BeoLab 3500…
When the BeoLab 3500 is in standby, you can
use the Beo4 remote control to exclude or
include the BeoLab 3500 speakers in a Timer
Play programming. Press LIST to display
SHIFT *
and then press 0 to change between TIMER ON
and NO TIMER.
C L O S E - U P O P E R A T I O N
*NOTE: You must add
SHIFT
to the Beo4 list of
extra functions, please refer to Beo4’s own
User’s guide and the chapter
‘Customising
your Beo4’ for further instructions.
The BeoLab 3500 display and close-up
operation panel – If the BeoLab 3500 speakers
are included in a Timer play function, it is
indicated by a small red light in the TIMER key
to the left on the BeoLab 3500.
The display shows that BeoLab 3500 is
included in a Timer Play programming.
The display shows that the BeoLab 3500 is now
excluded from a Timer Play programming – it
will not start up automatically as programmed
on your main room A/V system.