Bang & Olufsen BeoLab 3500, User Manual

Page: 15 / 24

15
Getting and muting sound
The right hand key marked MUTE • on the
BeoLab 3500 enables you to listen-in on a
source that is currently playing in your main
Bang & Olufsen system.
• If no source is playing when you touch
MUTE •, the BeoLab 3500 will switch on to a
source that was last playing in your main
system*.
No matter how, whenever you touch MUTE •,
the sound from your main system will be
heard instantaneously in the BeoLab 3500
speakers.
• Touch MUTE • again briefly, and the BeoLab
3500 switches off (a red standby indicator
appears in the display). If you keep your
finger on the key for two seconds, both the
BeoLab 3500 and your main Bang & Olufsen
system will switch off simultaneously.
When you switch on the BeoLab 3500 in this
way, you will only get sound in the BeoLab
3500 speakers – the loudspeakers in your main
system will not be cut in.
*Note: In a BeoLink ML system, you will switch
on the radio (or TV) program that was last
playing. In an MCL based system, you will start
up the audio source that was last playing.