10
Raises the volume
Lowers the volume
Press right on the middle of the volume button to
silence the speakers immediately, press again to
recall the sound
Press to display
SPEAKER
*
Press to adjust balance to the left
Press to adjust balance to the right
Press to display
A.SETUP
*
Press to display
BASS
Press for more bass
Press for less bass
Press to display
TREBLE
Press for more treble
Press for less treble
Press to display
LOUDNSS
Press to set loudness to on/off or,
you can press
▲
for Loudness on or
▼
for loudness off
Adjust the various sound levels to your liking,
then store them if you wish, see next page…
A D J U S T S O U N D …
Volume can be adjusted any time by pressing
∧
or
∨
on the Beo4 remote control; or you
can silence the BeoLab 3500 speakers
completely by pressing right on the middle of
the volume button.
The Beo4 remote control enables you to adjust
the sound coming out of the BeoLab 3500
speakers. Each time you press LIST, a cue in the
Beo4 display indicates which adjustment can
be made.
All the sound levels will be reset to their
original values when you switch off the
BeoLab 3500 unless you turn your adjustment
into a permanent setting of the BeoLab 3500.
All the current sound levels will be stored
simultaneously.
Note: The sound in the BeoLab 3500 speakers
is adjusted quite independently from your
main Bang & Olufsen system. (In an MCL
system, however, if you raise the volume in the
BeoLab 3500 speakers considerably, the
volume level in the main system will be raised
as well.)
LIST
GO
then
then
tt
ss
LIST
LIST
then
LIST
GO
then
LIST
*Note: In order to display
A.SETUP
and
SPEAKER
, you have to add the function to the
Beo4 list of functions, please refer to the Beo4
user's guide and the chapter,
Customising your
Beo4.
Summary of Contents for BeoLab 3500
Page 1: ...BeoLab 3500 User s guide...
Page 22: ......
Page 23: ......
Page 24: ...3508041 1990 Printed in Denmark by Bogtrykkerg rden a s Struer...