26
Setting a fixed volume
You can choose whether all calls should
start at the same volume. The volume can
be adjusted in eight steps, where 1 is the
lowest volume and 8 is the highest. Even if
you set a fixed volume, you can still adjust
the volume using the wheel during a call.
Extended Redial
BeoCom 3 is pre-set to store calls from
other phones connected to the same ISDN
connection in its Redial list. If you do not
want this registration, you should turn off
Extended Redial.
Turn flashing indicator lights off
The indicator lights flash when a call from
a new Caller ID is received, when
activating various ISDN services and when
the ringer signal is disconnected. If you
choose to disconnect the flashing of the
indicator lights, you will still be informed
of the status and news via the display.
>> Settings – for your phone or phone system
Extended Redial
Yes
No
Store calls from
other telephones
Menu
OK
OK
OK
Press Menu to access the main
menu
Turn the wheel to find ‘Setup
menu’ and press OK
Turn the wheel to find
‘Extended Redial’ and press OK
Turn the wheel to select ‘Yes’
or ‘No’
Press OK to store the setting
Indicator lights
Yes
No
News flash
Menu
OK
OK
OK
Press Menu to access the main
menu
Turn the wheel to find ‘Setup
menu’ and press OK
Turn the wheel to find
‘Indicator lights’ and press OK
Turn the wheel to select ‘Yes’
or ‘No’
Press OK to store the setting
Preset volume
Yes
No
Begin calls at same
volume level
Menu
OK
OK
OK
OK
Press Menu to access the main
menu
Turn the wheel to find ‘Setup
menu' and press OK
Turn the wheel to find
‘Preset volume’ and press OK
Turn the wheel to select ‘Yes’
or ‘No’ – press OK
…if you select ’Yes’ – now set
the volume using the wheel
Press OK to store the setting
Summary of Contents for BeoCom 3
Page 1: ...BeoCom 3 Guide...
Page 2: ......
Page 38: ...3507083 0108 Printed in Denmark by Bogtrykkerg rden a s Struer...
