Bang & Olufsen BeoCenter 6-23, Reference Book

Page: 38 / 68

38
Connect a Bang & Olufsen recorder
>> Connect additional video equipment
Disconnect all involved systems from the mains
before you connect external equipment.
> Connect one end of a 21-pin AV cable to the AV
socket on the rear of the recorder.
> Then run the cable to the AV 1 socket on the
back of the television.
If the connection between the television and
recorder is lost or not connected appropriately,
then CONNECTION LOST appears on the screen
when you try to program a timed recording.
Restore the connection and try again.
Aerial connection
Use your external aerial connection (or cable TV
network connection) and the aerial cable supplied
with the video recorder.
> Connect the cable from your external aerial to
the signal input socket marked on the rear
panel of the recorder.
> Direct the aerial signal to the television, using
the aerial cable supplied with the recorder.
> Plug one end into the socket marked ‘TV’ on
the recorder and the other end into the aerial
socket marked ‘TV’ on the television’s socket
panel.
BeoCord V 8000
If you connect a BeoCord V 8000 to your tele-
vision, some of the features of the BeoCord
V 8000 function differently than described in the
BeoCord V 8000 Guide, and some are not avail-
able. A supplement for the BeoCord V 8000 is
available from you Bang & Olufsen retailer.
Video recorder BeoCenter