Bang & Olufsen BeoCenter 6-23, Reference Book

Page: 37 / 68

37
Connect a set-top box
Disconnect all involved systems from the mains
before you connect external equipment.
> Connect one end of a 21-pin AV cable to the
set-top box.
> Run the cable to the AV 1 or AV 2 socket on the
back of the television.
> Connect the IR transmitter to the IR OUTPUT
socket on the television.
> Fasten the IR transmitter to the IR receiver of the
set-top box.
To be able to use the remote control included with
your set-top box, do not cover its IR receiver
entirely.
Automatic standby …
When you register a set-top box in the
CONNECTIONS menu, you can also select an
‘AUTO STANDBY’ time for your set-top box. This
means that you can select if the connected set-top
box should switch to standby automatically.
The options are:
AFTER 0 MIN … The set-top box switches to
standby immediately when you select another
source.
AFTER 30 MIN … The set-top box switches to
standby 30 minutes after you have selected
another source*.
AT TV STANDBY … The set-top box switches to
standby when you switch the television to
standby.
NEVER … The set-top box does not switch to
standby automatically.
FOLLOW TV … The set-top box switches on, when
you switch your television on and it switches to
standby, when you switch your television to
standby.
*If you switch the television to standby before the
30 minutes have passed, the set-top box is also
switched to standby.
Set-top boxes must be set up in accordance with
the documentation enclosed with them.
BeoCenter Set-top box