B&R Panel PC 800 User Manual Download Page 99

Page: 99 / 396

Technical data • Individual components

Chapter 2

Technical data

Panel PC 800 User's Manual V1.30

3.9.7 5AC801.SSDI-02

3.9.7.1 General information

This 180 GB slide-in compact SSD (solid-state drive) is based on multi-level cell (MLC) technology and can be

used in APC810 and PPC800 system units.

When used in a PPC800

Information:

The adapter 5AC803.BC02-00 is required for the use of slide-in compact drives.

When inserted in the slide-in compact slot, the slide-in compact drive is accessed internally via SATA.

3.9.7.2 Order data

Model number

Short description

Figure

Drives

5AC801.SSDI-02

180 GB SATA slide-in compact SSD (MLC)

Optional accessories
Drives

5MMSSD.0180-00

180

SATA

SSD

(MLC);

replacement

part

for 5AC801.SSDI-02 and 5AC901.CSSD-02; SSD for

5PP5IO.GMAC-00; note: please see the manual for information

about using this SSD

Table 76: 5AC801.SSDI-02 - Order data

3.9.7.3 Technical data

Caution!

A sudden loss of power may result in data loss! In very rare cases, the mass storage device may also

become damaged.
To prevent damage and loss of data, the use of a UPS device is recommended.

Information:

The following characteristics, features and limit values only apply to this accessory and can deviate

from those specified for the complete system. The data specifications for the complete system take

precedence over those of individual components.

Product ID

5AC801.SSDI-02

General information

Certification

Yes

cULus

Yes

GOST-R

Yes

Solid state drive

Capacity

180 GB

Data reliability

<1 unrecoverable error in 10

bit read accesses

MTBF

1,200,000 hours

S.M.A.R.T. support

Yes

Interface

SATA

Maintenance

None

Sequential read

Max. 550 MB/s with SATA 6 Gbit/s

Max. 280 MB/s with SATA 3 Gbit/s

Sequential write

Max. 520 MB/s with SATA 6 Gbit/s

Max. 260 MB/s with SATA 3 Gbit/s

Table 77: 5AC801.SSDI-02 - Technical data

Summary of Contents for Panel PC 800













































































































































































































































































































































































































Search results

Summary of Contents for Panel PC 800

Reviews:

Related manuals for Panel PC 800

Brands by name

Popular brands

B&R Panel PC 800, User Manual

Search results

Summary of Contents for Panel PC 800

Reviews:

Related manuals for Panel PC 800

Brands by name

Popular brands