B&R Panel PC 800 User Manual Download Page 344

Page: 344 / 396

Maintenance and service • Installing and replacing slide-in compact drives

344

Panel PC 800 User's Manual V1.30

4 Installing and replacing slide-in compact drives

Information:

The SATA I interface allows disks to be replaced during operation (hot plugging). In order to take

advantage of this capability, this feature must be supported by the operating system.

4.1 Procedure

1. Loosen and remove the two quick release screws on the protective cover / slide-in compact drive.

Figure 196: Loosening the quick release screws

2. Insert the compact SATA drive and tighten the quick release screws.

Figure 197: Inserting the compact SATA drive

Summary of Contents for Panel PC 800













































































































































































































































































































































































































Search results

Summary of Contents for Panel PC 800

Reviews:

Related manuals for Panel PC 800

Brands by name

Popular brands

B&R Panel PC 800, User Manual

Search results

Summary of Contents for Panel PC 800

Reviews:

Related manuals for Panel PC 800

Brands by name

Popular brands