B&R MAPPC700A-ENG, User Manual

Page: 437 / 524

Accessories • Cables
Chapter
6
Accessories
437 Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
16.5.3 Cable connection
The SDL flex cable with extender must be connected between the Industrial PC and Automation
Panel 900 display unit in the correct direction. The signal direction is indicated on the extender
unit for this purpose:
• Connect the end labeled "SDL IN" with the video output of the APC 620 / APC 810 or
Panel PC 700 (monitor/panel output) or Panel OUT of an AP900 AP Link card.
• The "SDL OUT" end should be connected to the display unit (e.g. Automation Panel 900)
via the Automation Panel Link insert card (Panel IN).
Figure 237: Example of the signal direction for the SDL flex cable with extender - APC620
Figure 238: Example of signal direction for the SDL flex cable with extender - PPC700
Figure 239: Example of signal direction display - SDL flex cable with extender
Automation PC 620
Automation Panel 900
SDL IN SDL OUT
SDL IN
SDL OUT
Panel PC 700
Automation Panel 900
SDL OUT SDL IN
SDL OUT
SDL IN
SDL OUT
SDL IN
SDL OUT
SDL IN
Automation Panel 900
Automation PC 620
Automation Panel 900
+
Automation Panel Link 5DLSDL.1000-01
SDL OUT SDL IN SDL OUT SDL IN
auf
Panel IN auf
Panel OUT