background image

 

Unitronics 

 

 

UniStream™ HMI Panel 

Installation Guide 
USP-070-B10, USP-070-B08 
USP-104-B10, USP-104-M10  
USP-156-B10 

Unitronics’ UniStream™ platform comprises control devices that provide robust, flexible 

solutions for industrial automation.  
This guide provides basic installation information for the UniStream™ HMI Panel.  
Technical specifications may be downloaded from the Unitronics website. 

The UniStream™ platform 

comprises CPU controllers, HMI 

panels, and local I/O modules  

that snap together to form an  

all-in-one Programmable Logic 
Controller (PLC).  
Expand the I/O configuration 

using a Local Expansion Kit or 

remotely via CANbus. 

 

 

CPU-for-Panel 

CPUs are Programmable Logic Controllers (PLCs), the heart of the 

UniStream™ platform. 
The CPU-for-Panel cannot operate independently. It must be plugged 

into the back of a UniStream™ HMI panel. The panel provides the CPU’s 

power source. The CPU-for-Panel comprises: 

 

IO/COM Bus connector for interfacing Uni-I/O™ & Uni-COM™ modules  

 

Isolated RS485 and CANbus ports 

 

Backup battery 

HMI Panels 

Available in 

different 

dimensions 

A high-resolution touch screen provides the operator interface for the 

system and the physical foundation for a PLC+HMI+I/Os all-in-one 

controller.  
The DIN-rail structure on the panel’s back is designed to physically 

support a CPU-for-Panel controller, Uni-I/O™ and/or Uni-COM™ 

modules. 
Each panel comprises: 

 

AUX connector to support the CPU 

 

1 audio-out 3.5mm jack 

 

1 microSD slot 

 

2 type A, USB host ports and 1 Mini-B USB device port 

 

2 Ethernet ports, RJ45, 10/100 Mbps 

 

1 power input connector, 12/24 VDC 

I/O Options 

Integrate I/Os into your system by using: 

 

On-board I/Os: snap onto the panel for an all-in-one configuration 

 

Local I/O via a Local Expansion Kit 

 

Remote I/O via EX-RC1 

Programming 

Software 

All-in-one UniLogic™ software, for hardware configuration, 

communications, and HMI/PLC applications, available as a free 

download from Unitronics web site. 

 

Use of this product is subject to a Unitronics Controller License Agreement, a copy of which can be found at  

http://unitronics.com/unistream/Agreements/UniLic1.pdf

 

 

Summary of Contents for UniStream USP-070-B10









Reviews: