UniStream™
Unitronics
3
Kit Contents
1 HMI Panel: 7”, 10.4” or 15.6”
7” panel, includes 4 mounting brackets
10.4” panel, includes 8 mounting
brackets and 2 panel supports
15.6” panel, includes 10 mounting
brackets and 2 panel supports
1 panel mounting seal
1 power terminal block
HMI Panel Diagram
HMI Panel Front and Rear View
1
Screen Protection
A plastic sheet attached to the HMI Panel screen for protection.
Remove it during installation of the HMI Panel.
2
Audio Outlet Seal
Prevents dust accumulation in the small outlet that serves the
HMI panel’s embedded speaker.
Caution
Keep the seal in place when the embedded speaker is not used. The seal must
be kept in place for IP66 and NEMA 4X compliance.
3
DIN-rail structure
Physical support for the CPU-for-Panel, Uni-I/O™ and/or Uni-
COM™ modules.
4
12/24VDC power
input
Connection point for the HMI Panel’s power source.
Connect the Terminal Block supplied with the kit to the end of
the power cable.
5
2 Ethernet (RJ45)
ports
Support high-speed Ethernet communications.
6
USB Device
Use for application download and direct PC-UniStream
communication.
7
2 USB Host ports
Provide the interface for external USB devices.
8
microSD slot
Supports standard microSD cards.
9
Audio-out jack
In addition to the HMI Panel’s embedded speaker outlet, this
3.5mm Audio-out jack enables you to connect external
amplifiers and speakers.
10 Auxiliary
connector (AUX)
Provides the electrical connection for the CPU-for-Panel.
11 Support Slots
Snap the supports (supplied with 10.4” and 15.6” panels only)
into these slots, to hold it upright on a desk while programming.