B&R MAPPC700A-ENG, User Manual

Page: 275 / 524

Software • BIOS options
Ch
apte
r 4
Soft
w
are
275 Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
USB Keyboard
Legacy Support USB keyboard support can be
enabled/disabled here. Disabled Disables this function.
Enabled
Enables this function.
USB Mouse Legacy
Support USB mouse support can be
enabled/disabled here. Disabled
Disables this function.
Enabled
Enables this function.
USB Storage Device
Support USB storage device support can be
enabled/disabled here. Disabled Disables this function.
Enabled Enables this function.
Port 64/60 Emulation Port 64/60 emulation can be
enabled/disabled here. Disabled USB keyboard functions in all systems excluding
Windows NT.
Enabled USB keyboard functions in Windows NT.
USB 2.0 Controller
Mode Settings can be made for the USB
controller. Full Speed 12 MBps
Hi Speed 480 MBps
BIOS EHCI Hand-
Off The support for the operating system can
be set up without the fully automatic EHCI
function. Disabled Disables the function
Enabled Enables this function.
USB Beep Message Option for outputting a tone each time a
USB device is detected by the BIOS
during the POST. Disabled Disables this function.
Enabled Enables this function.
USB Stick Default
Emulation You can set how the USB device is to be
used. Auto USB devices with fewer than 530MB of memory
are simulated as floppy disk drives and devices
with larger capacities are simulated as hard
drives.
Hard disk An HDD-formatted drive can be used as an FDD
(e.g. zip drive) for starting the system.
USB Mass Storage
Reset Delay The waiting time that the USB device
POST requires after the device start
command can be set.
Information:
The message "No USB mass storage
device detected" is displayed if no USB
memory device has been installed.
10 Sec, 20 Sec, 30 Sec,
40 Sec
Value set manually.
BIOS setting Meaning Setting options Effect
Table 116: X945 Advanced USB Configuration setting options (Forts.)