B&R MAPPC700A-ENG, User Manual

Page: 84 / 524

84
Technical data • Entire device
Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
Voltages on the PCI slot plug
The plug design for the PCI slot is the same as the design for a 5-volt PCI plug. The supply is
applied at 3.3 volts and 5 volts on the actual plug.
2.4.11 Status LEDs
The status LEDs are integrated in the system unit.
Figure 33: PCI connector type: 5 volt
Status LEDs
LED Color Meaning
Power Green On Supply voltage OK
Red On The system is in standby mode
(S5: soft-off mode or S4:
Hibernate mode -Suspend-to-
Disk)
HDD Yellow On Signals IDE drive access (CF,
HDD, CD, etc.)
Link 1 Yellow On Indicates an active SDL
connection on the monitor /
panel plug.
blinkin
g An active SDL connection has
been interrupted by a loss of
power in the display unit.
Link 2 - - No function
Table 40: Status LEDs
5 V PCI card
Dual-volt PCI card
Universal card
5 V and 3.3 V compatible
5 V connector design
Supply on 5 and 3.3 V connector
3.3 V connector design
3.3 V PCI card