B&R MAPPC700A-ENG, User Manual

Page: 318 / 524

318
Software • Upgrade information
Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
3.5. Upgrade all SDLR (AP800/AP900) - All SDLR controllers on
all Automation Panels on the monitor/panel are automatically upgraded (default after 5 sec).
3.6. Return to Main Menu
Concerning item 4:
Submenu 2 is opened for upgrading the SDLR controller on the AP Link slot.
4.1. Upgrade SDLR on AP 8 (AP800/AP900) - The SDLR controller on
Automation Panel 8 is automatically updated.
4.2. Upgrade SDLR on AP 9 (AP800/AP900) - The SDLR controller on
Automation Panel 9 is automatically updated.
4.3. Upgrade SDLR on AP 10 (AP800/AP900) - The SDLR controller on
Automation Panel 10 is automatically updated.
4.4. Upgrade SDLR on AP 11 (AP800/AP900) - The SDLR controller on
Automation Panel 11 is automatically updated.
4.5. Upgrade all SDLR (AP800/AP900) - All SDLR controllers on
all Automation Panels on the AP Link slot are automatically upgraded (default after 5 sec).
4.6. Return to Main Menu
Concerning item 5:
Submenu 3 for the add-on UPS firmware and upgrade and the battery settings upgrade is
opened.
5.1. Upgrade add-on UPS firmware (5AC600.UPSI-00)- The firmware for the
add-on UPSI is automatically upgraded.
5.2. Upgrade battery settings (5AC600.UPSB-00) - The battery
settings for 5AC600.UPSB-00 are automatically upgraded.
5.3. Return to Main Menu
Concerning item 6:
Returns to the shell (MS-DOS).
2.2.2 Possible upgrade problems and version dependencies
1. The SDLR firmware can only be updated if an Automation Panel with Automation Panel Link
Transceiver (5DLSDL.1000-01) and Automation Panel Link Receiver (5DLSDL.1000-00) is
connected. This update is only permitted in an office environment (clean environment - no
disturbances) because a software error in versions older than V0.03 can cause errors. This error
Information:
The system must be powered off and on again after a successful controller upgrade.