Maintenance
8.2 User tips for increasing the service life of the display
8.2.1 Backlight
The service life of the backlight is specified by its "half-brightness time". An operating time of 50,000 hours would
mean that the display brightness would still be 50% after this time.
8.2.1.1 Measures to maintain backlight service life
•
The display brightness can be set to the lowest level that is comfortable for the user's eyes.
•
Bright images should be avoided as far as possible.
•
A 50% reduction in brightness can increase the half-brightness time by about 50%.
8.2.1.2 How can the service life of backlights be extended?
•
Set the display brightness to the lowest value comfortable for the eyes.
•
Use dark images.
•
Reducing the brightness by 50% can increase the half-brightness time by approximately 50%.
8.2.2 Image persistence
Image persistence refers to the "burning in" of a static image on a display after being displayed for a long time. It
does not only occur with static images, however. Image persistence is also referred to in the technical literature as
screen burn-in, image retention, memory effect, memory sticking or ghost image.
There are 2 different types:
•
Area type: This type can be seen in a dark gray image. The effect disappears if the display is switched
off for a long time.
•
Line type: This can result in permanent damage.
8.2.2.1 What causes image persistence?
•
Static images
•
No screensaver
•
Sharp transitions in contrast (e.g. black/white)
•
High ambient temperatures
•
Operation outside of specifications
8.2.2.2 How can image persistence be reduced?
•
Switch continuously between static and dynamic images.
•
Prevent excessive differences in brightness between foreground and background elements.
•
Use colors with similar brightness.
•
Use complementary colors for subsequent images.
•
Use screensavers.
8.3 Pixel errors
Information:
Displays can contain faulty pixels (pixel errors) due to the manufacturing process. They are not
grounds for initiating a complaint or warranty claim.
8.4 Repairs/Complaints and replacement parts
Danger!
Unauthorized opening or repair of a device may result in personal injury and/or serious damage to
property. Repairs are therefore only permitted to be carried out by authorized qualified personnel at
the manufacturer's premises.
Automation Panel 1000 - Hygienic design user's manual V2.00
75
