Technical data
4.1.5.1.4 Panel In interface
The interface is designed as a DVI-I connector (female) and can be operated with DVI-D or SDL transmission
technology.
Pin Pinout
Description
Pin Pinout
Description
1 TMDS data 2-
DVI lane 2 (negative)
16 HPD
Hot plug detection
2 TMDS data 2+
DVI lane 2 (positive)
17 TMDS data 0-
DVI lane 0 (negative)
3 TMDS data 2/4 SHIELD
Shield for data pairs 2 and 4
18 TMDS data 0+
DVI lane 0 (positive)
4 SDL-
SDL lane (negative)
19 TMDS data 0/XUSB1
SHIELD
Shield of data pair 0 and USB1
5 SDL+
SDL lane (positive)
20 XUSB1-
USB lane 1 (negative)
6 DDC clock
DDC-based control signal (clock)
21 XUSB1+
USB lane 1 (positive)
7 DDC data
DDC-based control signal (data)
22 TMDS clock shield
Shield of clock pair
8
23 TMDS clock+
DVI clock (positive)
9 TMDS data 1-
DVI lane 1 (negative)
24 TMDS clock -
DVI clock (negative)
10 TMDS data 1+
DVI lane 1 (positive)
C1
11 TMDS data 1/XUSB0
SHIELD
Shield of data pair 1 and USB0
C2
12 XUSB0-
USB lane 0 (negative)
C3
13 XUSB0+
USB lane 0 (positive)
C4
14 +5 V power
1)
+5 V power supply
C5
15 Ground (return for +5 V,
HSync and VSync)
Ground
-
-
1)
Protected internally by a multifuse.
Information:
Hot plugging output devices on the interface for service purposes is supported by the hardware and
graphic drivers of approved operating systems. Recalibration may be required for touch screen de-
vices.
A maximum of 100 mating cycles are specified for this interface.
It is important to note the following information about the transfer rate:
•
In SDL operation without USB type A/B cable, the USB transfer rate is limited to USB 1.1.
•
A USB transfer rate of USB 2.0 is possible in DVI or SDL operation with a USB type A/B cable.
4.1.5.1.4.1 USB transfer in SDL and DVI operation
Information:
In SDL operation without USB type A/B cable, the USB transfer rate is limited to USB 1.1.
A USB transfer rate of USB 2.0 is possible in DVI or SDL operation with a USB type A/B cable.
4.1.5.1.4.2 Cable lengths and resolutions for SDL transfer
4.1.5.1.4.3 Cable lengths and resolutions for DVI transfer
The following table shows the relationship between segment length and maximum resolution depending on the
DVI cable:
Resolution
DVI cable
Segment length [m]
VGA
640 x 480
SVGA
800 x 600
XGA
1024 x 768
HD
1366 x 768
SXGA
1280 x 1024
UXGA
1600 x 1200
FHD
1920 x 1080
1.8
5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00
5
5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00
The maximum cable length for DVI transfer is limited to 5 m due to the USB specification.
Automation Panel 1000 - Hygienic design user's manual V2.00
31
