Bandit 2890SP, Operating & Parts Manual

Page: 48 / 120

Bandit
42 Copyright 12/17
MODELS 2890SP/2900T
Use as a reference only, locations may vary depending on options or component manufacturer.
Lubrication point instructions are described on the machine, in the Lubrication & Coolant
Section and Maintenance Section of this manual, or component manufacturer’s manual.
NOTICE
MAINTENANCE
LUBRICATION CHART - 2900T
A­right­angle­grease­fi­tting­may­need­to­be­used­to­grease­some­of­the­lubrication­
points.­This­type­of­grease­fi­tting­can­be­obtained­from­most­local­automotive­
parts stores.
CHECK
# DESCRIPTION DAY WEEK MONTH PROCEDURE
1 Cutter Wheel Arm Pivot Bushings X 1­-­2­shots­of­grease­-­wipe­off­­excess
2 Track Expansion Assembly X Lubricate with dry lube
3 Grinder Bearings (Belt Driven) X Purge­bearings­daily­-­wipe­off­­excess
4 Swing Pivot Assembly Bushings X 1­-­2­shots­of­grease­-­wipe­off­­excess
5 Cylinder Lug Pin Bushing X 1­-­2­shots­of­grease­-­wipe­off­­excess
6
Steel Friction Areas: pivoting,
hinged, sliding, rolling
X
Lubricate (i.e. cutter wheel guard,
control box doors
7 Grading Blade Pivot Bushings X 1­-­2­shots­of­grease­-­wipe­off­­excess
8 Tracks
Per MFG’s Instructions
5
5
4
5
5
5
6
6