B&G Zeus2 series Operator'S Manual Download Page 118 | Manualshive

Page: 118 / 126

background image

Exporting the log file

The log file can be exported from the files browser.
When you select the Log database you are prompted to select a destination folder and
filename. Once accepted, the log file is written to the chosen location.

Software upgrades

The latest software for the Zeus

2

is available for download from our website, bandg.com.

Detailed instructions for how to install the software are included in the upgrade files.

Backing up your system data

Waypoints, Routes, and Tracks that you create are filed in your system. It is recommended to
regularly copy these files and your system settings files as part of your back-up routine. The
files can be copied to a card inserted in the card reader.
There are no export file format options for the system settings file. The following output
formats are available for exporting Waypoints, Routes, and Tracks files:

•

User Data File version 5

This is used to import and export waypoints and routes with a standardized universally
unique identifier (UUID), which is very reliable and easy to use. The data includes such
information as the time and date when a route was created, and so on.

•

User Data File version 4

This is best used when transferring data from one system to another, since it contains all the
extra bits of information these systems store about items.

•

User Data file version 3 (w/depth)

Should be used when transferring user data from one system to a legacy product (Lowrance
LMS, LCX, and so on.)

•

User data file version 2 (no depth)

Can be used when transferring user data from one system to a legacy product (Lowrance
LMS, LCX, and so on.)

•

GPX (GPS Exchange, no depth)

This is the format most used on the web that shares among most GPS systems in the world.
Use this format if you are taking data to a competitors unit.

•

Northstar.dat (no Tracks)

Used to transfer data to a legacy Northstar device.

Export all Waypoints, Routes and Tracks

Use the export option if you want to backup all Waypoints, Routes, and Tracks on your
system.

Export region

The export region option allows you to select the area from where you want to export data.

1.

Drag the boundary box to define the desired region

118

Maintenance

| Zeus2 Operator Manual

«
...
116
117
118
119
120
...
»

Summary of Contents for Zeus2 series































































































































Reviews:

No comments

Related manuals for Zeus2 series

Brand: dB Technologies Pages: 4

Brand: Power Acoustik Pages: 46

Brand: Vitek Pages: 28

Brand: Ssl Pages: 24

Brand: Xomax Pages: 19

Brand: Lanzar Pages: 42

Brand: Eclipse Pages: 8

Brand: VR3 Pages: 68

Brand: Viking Pages: 16

Brand: VIETA Pages: 58

Brand: Hyundai Mobis Pages: 272

Brand: Pyle Pages: 12

Brand: Caliber Pages: 28

Brand: FAAFTECH Pages: 2

Brand: Audiotec Fischer Pages: 24

Brand: Boss Audio Systems Pages: 19

Brand: Polaris Pages: 42

Brand: Car Solutions Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands