device is found, turn off its DHCP feature if possible. Refer to the
device’s own instructions for further assistance.
Ú
Note:
Iperf and DHCP Probe are tools provided for
diagnostic purposes by users familiar with network
terminology and configuration. Navico is not the original
developer of these tools, and cannot provide support
related to their use.
Internal Wireless
Select this option to enable or disable the internal wireless module.
Disabling wireless when not in use reduces the unit’s power
consumption.
NMEA 2000 setup
Receive waypoint
Select this option to allow another device capable of creating and
exporting waypoints via NMEA 2000 to transfer directly to this unit.
Send waypoint
Select this option to allow this unit to send waypoints to another
device via NMEA 2000.
Software Setup
| Vulcan Series Installation Manual
51
Summary of Contents for Vulcan Series
Page 1: ...ENGLISH VulcanSeries Installation Manual bandg com...
Page 2: ......
Page 8: ...8 Preface Vulcan Series Installation Manual...
Page 64: ...988 11099 001 0980...