B&G Vulcan Series, Installation Manual

Page: 47 / 64

For setting up the Instrument bar or a gauge on the Instrument
page with Fluid Level device data, refer to the Operator Manual.
Ú
Note:
A maximum of 5 tanks is supported using Fluid Level
devices.
Ú
Note:
Tank data that is output by a compatible engine
gateway can also be displayed, however tank configuration
for such a data source is not possible from this unit.
CZone setup
In order to communicate with the CZone modules connected to
the network, the Vulcan must be assigned a unique CZone Display
Dipswitch setting.
The functionality of the CZone system is determined by the CZone
Config File (.zcf ), which is stored on all CZone modules and the
Vulcan. The file is created using the CZone Configuration Tool, a
specialized PC application available from BEP Marine Ltd, and
associated CZone distributors.
The Vulcan system provides a means to load the Config file, as well
as apply updates to module firmware, removing the need to take a
laptop computer aboard the vessel.
Enabling CZone functionality
If the CZone device(s) are not automatically detected, it is possible
to manually enable CZone.
Assigning the dipswitch setting
Every product capable of controlling and viewing CZone devices
must be assigned a virtual dipswitch setting. This setting is unique
Software Setup | Vulcan Series Installation Manual
47