B&G Vulcan Series, Installation Manual

Page: 48 / 64

for each device. Typically it is set after the configuration file already
exists on the CZone system, but it may also be set in advance. To do
so, access the CZone menu on the Settings page.
When the configuration is already available on the network, it will
immediately commence uploading to the Vulcan once the
dipswitch is set. Allow this to complete, without interruption.
Setting CZone to display at startup
With this option selected, the CZone control page is shown first,
every time the Vulcan is powered up.
CZone backlight control
Enabling this causes the Vulcan to synchronize its backlight setting
with that of any CZone Display Interfaces set up to share backlight
settings.
Ú
Note:
CZone Config also needs to have the Vulcan set as a
controller.
Import and backup a configuration file
The files page may be used to import CZone configuration files, or
export a copy to a memory card in the card reader. Importing
overwrites the existing file on the Vulcan and all connected CZone
devices.
For further information, see
"Backing up and Importing user data"
on page
52.
Upgrading module firmware
The Files page also allows the loading of NMEA 2000 devices
firmware upgrades. For example, CZone firmware updates. For more
information, refer to
"NMEA 2000 device upgrades"
on page 54.
Wireless setup
The unit includes built-in wireless functionality that lets you use a
wireless device to remotely view (phone and tablet) and control the
system (tablet only). The system is controlled from the wireless
device by Apps downloaded from their relevant Application store.
Various 3rd party applications can also use the data stream.
48
Software Setup | Vulcan Series Installation Manual