![background image](http://html1.mh-extra.com/html/bandelin/sonopuls-hd-4050/sonopuls-hd-4050_user-instructions_3768958031.webp)
Assembly
Ultrasonic transducer
Standard horn
Vigorously turn sickle spanner
HS 40/42 long, in the opposite
direction
Plastic ruler
Threaded bolt
31 / 48
51376g GB/2018-04
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
Assembly
Keep the surfaces/threads to be screwed clean, using alcohol and a
fi
bre-free cloth if needed.
Screw in approx. 2/3 of the length of the threaded bolts of the new standard horn to be
mounted, into the mounting surface of the ultrasonic transducer.
Place a plastic ruler or similar on the threaded portion of the bolt, and press lightly in the
direction of the arrow
this will prevent the bolt from turning any further when the standard
horn is screwed on.
Screw the standard horn onto the threaded bolt and
fi
rst tighten by hand after removing the ruler.
Then, mount the standard horn
fi
rmly onto the ultrasonic transducer using both sickle
spanners.
Detailed information on the individual standard horns can be found in the separate product
information.
The black housing of the ultrasonic transducer and the aluminium cylinder (ultrasonic oscillating
system) may not be turned against each other. The ultrasonic oscillating system and its electrical
connections would be damaged as a result.
Summary of Contents for Sonopuls HD 4050
Page 44: ......