![background image](http://html1.mh-extra.com/html/bandelin/sonopuls-hd-4050/sonopuls-hd-4050_user-instructions_3768958015.webp)
green light:
Ultrasound output
blinking green:
Remote control through
the RS 232 interface
or
red light:
Error messages
blinking red:
Warning messages
1
LC display
Display of the operating parameters and status information
2
"START/STOP" key
Starting or stopping the ultrasound emission, ending functions,
exiting the menu
3
"SET" key
Call-up of the menu. Navigation within the menu
4
"Arrow" keys
Setting the menu or operating parameters
5 Control
LED
1
5
3
4
2
15 / 48
51376g GB/2018-04
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
2.3
Start-up
Check the positioning of the ultrasonic transducer in the holder.
Check the
fi
rm positioning of the probe and, if needed, clean thoroughly before
fi
rst use.
Connect the HF generator to the mains ( grounded socket) and switch on.
If needed, set the probe type (see chapter 3.1.1.)
Conduct a function test in accordance with chapter 6.2.1 if necessary (e.g. after replacing the
ultrasonic transducer).
Connect
the
temperature sensor (if needed).
3
Operation
3.1
Operating elements
Operation is conducted from the operating and display panel on the front side of the HF generator:
Summary of Contents for Sonopuls HD 4050
Page 44: ......