BANDELIN Sonopuls HD 4050, User Instructions, Page: 45 / 48

A Spanner for mounting/dismounting
Probes and standard horns are highly-sensitive parts that must be mounted and dismounted with
the greatest amount of care.
For this reason, only use the following spanners for the mounting/dismounting of probes from
standard horns, as well as of standard horns from the ultrasonic transducer:
Spanner
Type
Use
Spanner SW 10
Part of scope of supply.
To mount/dismount probes

chapters 4.4 and 4.5
Sickle spanner HS 25/28, long
1 unit is part of the scope of delivery of the HD 50
To mount/dismount all probes
(used to hold the UW 50
fi rmly
in place)

chapter 4
Sickle spanner HS 40/42
Part of the scope of supply of the homogeniser.
To mount/dismount all probes
(used to hold the standard
horn in place)

chapter 4
Sickle spanner HS 40/42, long
2 units are part of the scope of delivery of an additionally-
ordered standard horn.
To mount/dismount standard
horns from the ultrasonic
transducer

chapter 4.7
Torque Wrench DMS 10
Is not part of delivery.
Code No. : 3662