The space between the infrared adapter and
HF generator should be between 5 and 20 cm.
10 / 38
51406c GB/2019-07
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
1.4.2 Technical data, Ultrasonic converter UW
Transformation principle
piezoelectric
Ultrasonic frequency
2
approx. 30 kHz
Material
titanium/plastic (POM)
External dimensions
Dia. 50 mm, h = 160 mm
Connecting line
2.5 m, push-pull round plug (MEDISNAP plug)
Weight
260 g
Degree of protection
IP 30 according to DIN 60529, see also chapter 1.4.1
Hand key
Start/stop function
Environmental conditions, see chapter 1.4.
1.4.3
Remote control
The ultrasonic homogenizer has an infrared interface (RS-232, half-duplex) and can be applied by
the user for
• remote monitoring of the operation data.
•
remote control of the process cycle.
The protocol and command set for the infrared interface (application information) are provided by
the manufacturer on request.
For communication, a commercially available
infrared adapter (RS-232) can be used. The
program-related implementation required for
communication is the responsibility of the user
and is not supported by the manufacturer.
The manufacturer only guarantees proper
functioning of the interface.
Optical access is located on the bottom of the
housing with direction of view to the left (seen
from the front side). For a secure connection,
the infrared adapter must be positioned
according to illustration.
Note:
Proper operation will depend on the length of the connection cable. If an extension is used, a
length of 5 m may not be exceeded.
The WINPULS remote operation programme, for operating systems Windows 2000 and
Windows XP, is provided optionally, see chapter 7.
Diverse additional functions such as protocol and batch functions allow for process control and
quality control to be comfortably operated via PC.
The WINPULS remote operation programme is not part of the standard product range.