![background image](http://html.mh-extra.com/html/bandelin/sonoplus-mini20/sonoplus-mini20_instructions-for-use-manual_470792033.webp)
BANDELIN
SONOPULS mini20
Microtip: MS 2.5
o.k.
[start]
MS 2.5
START
STOP
PROG
BANDELIN
02.01 - Apr 17 2008
Microtip: MS 2.5
o.k.
[start]
MS 2.5
33 / 38
51406c GB/2019-07
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
6.4
Repairs and service
If you identify errors or defects that cannot be recti
fi
ed, use of the homogenizer must be halted.
In such a case, please contact the supplier or the manufacturer:
BANDELIN electronic GmbH & Co. KG
Heinrichstraße
3-4
12207
Berlin
Repairs/
Maintenance department:
E-mail:
Tel.:
+49-(0)-30 – 768 80 – 13
Fax:
+49-(0)-30 – 76 88 02 00 13
In the event of returns, the General Terms and Conditions for Delivery and Payment of BANDELIN
electronic GmbH & Co. KG apply.
In addition, the homogenizer is to be cleaned and decontaminated (if necessary), see the following
chapter.
6.4.1 Decontamination
certi
fi
cate
If the homogenizer is sent back to the manufacturer for repairs (with accessories, if applicable),
the form “Certi
fi
cate of Decontamination” is to be
fi
lled out and af
fi
xed to the packaging on the
outside, in a visible spot.
If this form has not been
fi
lled out, we reserve the right to refuse receipt of the package in order to
protect our employees.
The form can be downloaded from the Internet as a PDF
fi
le:
www.bandelin.com - Service - Downloads ...
6.4.2
Software version display
In some cases it may be necessary to inform authorised skilled personnel or the manufacturer of
the software version for the homogenizer.
After the HF generator is turned on (power switch) and initialisation is complete, press and hold
the “PROG” button and press the “START/STOP” button simultaneously. An ultrasonic transducer
must not be connected.
The software version provided here is an example, the actual speci
fi
cations may differ.