manualshive.com logo in svg

BANDELIN SONOPLUS mini20, Instructions For Use Manual, Page: 34 / 38

Share
Download
BANDELIN SONOPLUS mini20 Instructions For Use Manual Download Page 34

34 / 38

51406c GB/2019-07

1

 electronic GmbH & Co. KG  •  Heinrichstraße 3-4  •  12207 Berlin  •  Deutschland  •  [email protected]

7  

 Accessories  

The proper  accessories facilitate use of the ultrasound and also protect the device and materials 
used at the same time.

BANDELIN offers a broad range of  accessories, see appendix.
Additional information may be obtained from our supplier, our sales representatives, or from our 
website.

No-obligation telephone consultation: 

 

Website:

  +49-(0)-30 – 768 80 – 0 

 

 

www.bandelin.com

7.1 Required 

 

accessories 

- not applicable - 

 

7.2  

Optional  accessories

Pos.

Order no.

Designation

1

3639

 Probe MS 1.5

2

3654

 Probe MS 2.0

3

3652

 Probe MS 2.5

7.3 Preparations 

- not applicable -  

8 Consumable 

materials 

- not applicable -

  

9 

Taking the unit out of service  

If the homogenizer no longer works, it must be disposed of appropriately. Some 
electrical components are considered to be toxic waste.

Summary of Contents for SONOPLUS mini20







































Reviews:

No comments