1.
DESCRIPTION
BAMOPHAR 107 is designed for pH and ORP measurements. It is equipped with a color touch screen for the display of a multilingual menu
friendly and intuitive. The reading is easy at the same time for measurement, temperature and relay status. It displays a menu with all
parameters for configuration of analogue outputs, thresholds and regulation mode. In order to facilitate its commissioning, a programming
menu can simulate the measurement, acting on themeasurement analog outputs and P.I.D, as well as on the thresholds.
2.
TECHNICAL FEATURES
End-user interface
Color touch screen 4.3'', resolution 480x272 pixels
Display of measurements, menus, temperature, relay status
Configuration: password protected
Measuring scales
0... 14 pH or -1000 ... +1000 mV
Accuracy
± 0.03 pH or ± 3 mV
Input impedance
> 10¹³ Ω
Sensor signal connection
For coaxial connector (9054) on panel and rail mount devices
Screw terminals on wall mount instrument
Temperature compensation
Automatic, input for sensor Pt 100 Ω at 0 °C, range 0 to 100 °C
Manual, between 0 and 100 °C, by configuration
Relay outputs
4 contacts N.O., voltage free
Configurable thresholds
2 independent thresholds, to set up for measurement or temperature
1 independant threshold to set up for measurement or temperature, or for an external signal (E1)
1 threshold for alarm (too long injection, measurement out of range, faulty Pt100 sensor or
cleaning mode)
Contact Initial resistance
100 mΩ max. (voltage drop 6 V DC 1 A)
Switching power
831 VA AC / 3 A / 277 V AC
90 W / 3 A / 30 V DC
Switching capacity (min.)
100 mA, 5 V DC (depending of frequency, ambient conditions)
ON/ OFF Regulation
Adjustable cycle time from 0 to 9999 s,
High and low proportional bandwidths, high and low dead zones
PID Regulation
Adjustable proportionality from 0 to 200%; Integrant and Derivative: 0 to 999 s
Calibration routine
Relay outputs inhibited; Analogue outputs on standby at latest values
Auto-cleaning menu
Settings of frequency and duration; Relay outputs inhibited, analogue outputs on standby at latest
values
Measurement output
0/4 ... 20 mA (max. 600 Ω) proportional to measurement value of pH or ORP
Temperature output or PID
0/4 ... 20 mA (max. 600 Ω), scaling within 0 … 100°C
Program testing
Simulation through the menu on measurement output, temperature, PID and thresholds
Main power supply
230 V AC - 50/60 Hz - consumption 10 VA (other supplies on request)
Models
Panel mount, 96x144 mm; Front IP 65, rear IP 40
Wall mount, IP65; Cable glands
Temperature limits
Operating: -5 ... +50 °C; Storage: -10 ... +70 °C
OPTION (RS 422 + data logger)
Interface
RS422 output, J-BUS link; Binary slave mode; 2400 to 9600 bauds
Data Logger
Record of cycle average measurement; 150 000 records max. on memory card, reading on
external driver.
3.
DIMENSIONS
MES
23-11-2018
M-107.01-EN-AE
107-01
/3
pH/ mV monitors
BAMOPHAR 107
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel
Fax
+33 (0)1 30 25 83 20
+33 (0)1 34 10 16 05
Web
www.bamo.eu
INTERNATIONAL
