- 18 -
1. Press P1 and P2 simultaneously for three seconds
to begin programming the board.
2. Letter A appear on the display. Scroll the menu with P1
until letter C appears on the display.
Press P2 to confirm.
3. You should see 1 on the display. Scroll the values
with P1 until 5 will appear on the display.
Press P2 to confirm.
4. You should see 0 on the display.
Push the button P1 and P2 simultaneously until the exit
from programming mode.
5. All codes are now deleted.
ATTENTION!!!!!! This operation will delete all remote control codes stored in the control board memory.
Parameter C5: erasing of all remote control codes