- 17 -
1. Press P1 and P2 simultaneously for three seconds
to begin programming the board.
2. Letter A appear on the display. Scroll the menu with P1
until letter C appears on the display.
Press P2 to confirm.
3. You should see 1 on the display. Scroll the values
with P1 until 3 will appear on the display.
Press P2 to confirm.
4. You should see 0 on the display.
Push the button on the remote to be learned.
ATTENTION!!!!!! When entering a code already stored, the code will be deleted from the memory of the board.
Parameter C3: pedestrian opening code
1. Press P1 and P2 simultaneously for three seconds
to begin programming the board.
2. Letter A appear on the display. Scroll the menu with P1
until letter C appears on the display.
Press P2 to confirm.
3. You should see 1 on the display. Scroll the values
with P1 until 4 will appear on the display.
Press P2 to confirm.
4. You should see 0 on the display.
Push the button on the remote to be learned.
ATTENTION!!!!!! When entering a code already stored, the code will be deleted from the memory of the board.
ATTENTION!!!!!! If the parameter T6 has been set to Open gate pilot light, the courtesy light cannot be operated
with the remote control.
Parameter C4: courtesy light code