baltur TBG 35 MC, Instruction Manual For Installation, Use And Maintenance

Page: 57 / 64

MAINTENANCE TIME
Part description Action to be performed Gas
COMBUSTION HEAD
ELECTRODES
VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING, CHECK DISTANCE, CHECK
ELECTRICAL CONNECTION
YEAR
FLAME DISC INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING, YEAR
IONISATION PROBE
VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING, CHECK DISTANCE, CHECK
ELECTRICAL CONNECTION
YEAR
COMBUSTION HEAD
COMPONENTS
INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING, YEAR
INSULATING GASKET SEAL VISUAL INSPECTION AND POSSIBLE REPLACEMENT YEAR
GAS DELIVERY COUPLING SEAL SEAL VISUAL INSPECTION AND POSSIBLE REPLACEMENT YEAR
AIR LINE
AIR GRILLE/DAMPERS CLEANING YEAR
AIR DAMPER BEARINGS GREASING, (Note: apply only on burners with bearings requiring lubrication) YEAR
FAN FAN AND SCROLL CLEANING, DRIVE SHAFT GREASING YEAR
AIR PRESSURE SWITCH CLEANING YEAR
AIR PRESSURE PORT AND PIPES CLEANING YEAR
SAFETY COMPONENTS
FLAME SENSOR CLEANING YEAR
GAS PRESSURE SWITCH FUNCTIONAL INSPECTION YEAR
VARIOUS COMPONENTS
ELECTRIC MOTORS COOLING FAN CLEANING, BEARING NOISE CHECK YEAR
MECHANICAL CAM CHECK OF WEAR AND OPERATION, GREASING OF SLIDING BLOCK AND SCREWS YEAR
LEVERS/TIE-RODS/BALL JOINTS CHECK OF ANY WEAR, COMPONENT LUBRICATION YEAR
ELECTRICAL SYSTEM CHECK OF CONNECTIONS AND TERMINAL TIGHTENING YEAR
INVERTER COOLING FAN CLEANING AND TERMINAL TIGHTENING YEAR
CO PROBE CLEANING AND CALIBRATION YEAR
O2 PROBE CLEANING AND CALIBRATION YEAR
COMBUSTION HEAD EXTRACTION
KIT
CHECKING WEAR AND OPERATION YEAR
FUEL LINE
GAS FILTER REPLACING THE FILTERING ELEMENT YEAR
HYDRAULIC/GAS SEALS CHECK OF ANY LEAKAGES YEAR
COMBUSTION PARAMETERS
CO CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
CO2 CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
BACHARACH SMOKE INDEX
CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP n.a.
NOX CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
IONISATION CURRENT CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
SMOKE TEMPERATURE CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
GAS PRESSURE REGULATOR PRESSURE MEASURED AT START-UP YEAR
IMPORTANT
In case of heavy-duty operation or when using special fuels, the maintenance intervals must be reduced adapting them to the real
operating conditions, according to the indications of the maintenance technician.
25 / 30
0006160096_202206
ENGLISH