baltur TBG 35 MC, Instruction Manual For Installation, Use And Maintenance

Page: 56 / 64

• Completely remove the mixing unit, pulling it out in the direction
shown by arrow (18), after pulling the ignition and ionisation cables
(14) out of their electrodes (figure 4).
Complete maintenance operations, proceed with re-assembly of
the combustion head, following the above instructions in reverse
order, after having checked for the correct position of the ignition
and ionisation electrodes (see the COMBUSTION HEAD AND
ELECTRODE DISK DISTANCE REGULATION diagram).
24 / 30
0006160096_202206
ENGLISH