baltur TBG 1100 ME, User Instruction Manual

Page: 7 / 114

5 / 22
0006160030_201306
ENGLISH
TECHNICAL SPECIFICATIONS
TBg 1100 me
THERMIC POWER MAX kW
11000
MIN kW 1000
OPERATION
PROGRESSIVE / ELECTRONIC MODULATING TWO STAGE
NOx EMMISION
mg/kWh
Class II (<120 mg/kWh)
MOTOR
50 Hz 22 kW - 2940
rpm
.
ELECTRICAL POWER ABSORBED*
kW 50 Hz 23
IGNITION TRANSFORMER 8 kV - 30 mA – 230 V / 50 Hz
VOLTAGE 50 Hz 3N ~ 400 V ±10%
PROTECTION RATING IP 54
FLAME DETECTION IONISATION ELECTRODE
ACOUSTIC PRESSURE** dBA 89.4
ACOUSTIC POWER *** dBA 98.6
WEIGHT WITHOUT PACKAGING kg 315
NATURAL GAS (G 20)
FLOW RATE
MAX m³n/h
1106
MIN m³n/h
101
PRESSURE MAX mbar
500
SUPPLIED MATERIAL
TBg 1100 me
INSULATING SEAL
2
STUD BOLTS
N° 4 M 20
HEXAGON NUTS
N° 4 M 20
FLAT WASHERS
N° 4 Ø 20
*) Total absorption at start with ignition transformer on.
The measurement has been carried out in Baltur's laboratory, in accordance with EN 15036-1 standard
** Acoustic pressure measured one meter behind the equipment, it refers to Baltur's laboratory environment conditions and cannot be compared to measurements
carried out in different locations, with burner running at maximum rated thermal capacity.
*** Acoustic pressure was obtained characterizing Baltur's laboratory with a sample source, this measurement has an accuracy of class 2 (engineering class) with a
standard deviation f 1.5 dB(A).
**) Acoustic pressure measured in the laboratory of the manufacturer with burner running on test boiler, at maximum rated heating capacity