II
CABINET AND BACKBOX FEATURES CONTINUED…
Provision available for CPU case padlock in backbox.
Backglass stores easily over playfield glass and provides reflected image while servicing.
The playfield is at proper playing angle with all leg levelers in their lowest position.
The wiring from the backbox to the cabinet is only a few cables.
Main cable from the cabinet mounted driver board is significantly reduced in length for greater
reliability and lower emissions and interference.
The cover for the Power Driver board is hinged to ensure that it is put back in its protective position
after service is performed.
DCS II sound system delivers stereo sound directly to the player to enhance game excitement without
requiring a high volume level.
CONVERTIBILITY
Operators are able to use the convertibility to rotate their pinball games by moving playfield
and a PC board instead of the entire machine. This is possible because of the ease of
conversion and the way the devices on the bottom of the playfield are protected by the
underside runners.
The playfield has unique runners protecting the parts on the underside of the playfield. These
runners provide the following features:
Installation and removal of the playfield is an easy process requiring little physical strength. This
ease is enhanced due to the main cable's attachment to the cabinet instead of the playfield.
The devices on the bottom of the playfield are naturally protected in the shipment of these kits.
The playfield may be handled and stored outside of the cabinet without fear of damage to the
devices attached to the underside.
Summary of Contents for Revenge from mars Pinbal 2000
