Bally Revenge from mars Pinbal 2000 Operation Manual Download

Page: 17 / 132

1-5

WITH THE HELP OF ANOTHER PERSON, carefully lift the backbox and set it on the cabinet.
See Figure 9.

FIGURE 9

9. Line up the four mounting holes in the cabinet with the mounting holes in the backbox. Place a

bushing  in  each  of  the  mounting  holes  from  the  inside  of  the  cabinet.    Insert  a  bolt  and  washer
through the outside of the backbox and into the cabinet in each of the four mounting holes.  Tighten
the bolts.  See Figure 10 below.

FIGURE 10

CAUTION

FAILURE TO INSTALL the backbox mounting hardware properly can cause personal injury.

Summary of Contents for Revenge from mars Pinbal 2000





































































































































Search results

Summary of Contents for Revenge from mars Pinbal 2000

Reviews:

Related manuals for Revenge from mars Pinbal 2000

Brands by name

Popular brands

Bally Revenge from mars Pinbal 2000, Operation Manual

Search results

Summary of Contents for Revenge from mars Pinbal 2000

Reviews:

Related manuals for Revenge from mars Pinbal 2000

Brands by name

Popular brands