1-13
DIAGNOSTICS
Open the coin door, press the Enter button and the System Menu appears on the screen. Use the Up
and Down buttons to move the cursor and select the Diagnostic menu. Press the Enter button to open
the menu when it is selected. Once the Diagnostic menu is open, use the Up and Down buttons to move
the cursor and select a test. Press the Enter button to enable the test. Press the Escape button to return
to the Diagnostic menu. Press the Escape button a second time to return to the System Menu.
In order to operate the tests that use the +50V or +20V circuits, pull the interlock switch button
out. The interlock switch is located on a bracket in the coin door opening.
SWITCH EDGES TEST
Press each of the switches one at a time. The name and number of the switch is on the screen.
If a switch other than the one pressed, or no switch at all is indicated, the system has detected a
problem with the switch circuit. To return the Diagnostic menu, press the Escape button.
SINGLE SWITCHES TEST
This test isolates a single switch and shows its state in the display. A mechanical switch is
‘made’ when the display reads closed. An opto switch is ‘made’ (opto beam broken) when the
display reads open. Use the Up or Down buttons to select the switch to be tested. To return the
Diagnostic menu, press the Escape button.
DIP SWITCH TEST
This test is used to show the positions of the DIP Switches. To return to the Diagnostic menu,
press the Escape button.
SYSTEM MENU
XX/XX/XX
X:XX p.m.
Diagnostics
Adjustments
Bookkeeping
Utilities
Printouts
Language
DIAGNOSTIC MENU
XX/XX/XX
X:XX p.m.
Switch Edges
Single Switch
DIP Switch
Solenoid Test
Single Lamp Test
Lamp Row/Column
All Lamps
Video Tests
Fuse Check
Summary of Contents for Revenge from mars Pinbal 2000
