Balluff BOS R254K-UUI-RH10-S4, Configuration Manual

Page: 202 / 214

94 english
7.5 Pin Assignment
7.5.1 Description
Several internal digital signals are available that can be
output or read in at the pins of the device.
Pin 4 and pin 2 can be configured with the following
functions:
Pin 4:
Digital Output
Pin 2:
– Digital Output
– Digital Input
7.5.2 ISDU
Name Index Subindex Access Length Data Type Data
Storage
Default
Pin 4 Function 0x0090
(144)
0 R/W 2 bytes Yes
Behavior IO-Link 1 R/W 1 byte UINT8(ENUM) No 0x00 (0) IO-Link
Mode 2 R/W 1 byte UINT8(ENUM) No 0x01 (1) = Digital
Output
Pin 4 Digital Configuration
1)
0x0091
(145)
0 R/W 4 bytes Yes
Signal Source 1 R/W 2 bytes UINT16(ENUM) No 0x0038 (56) =
ADSS1
Logic 2 R/W 1 byte UINT8(ENUM) No 0x00 (0) = Normal
Type 3 R/W 1 byte UINT8(ENUM) No 0x02 (2) = Push-
Pull
Pin 2 Function 0x0093
(147)
0 R/W 2 bytes Yes
Behavior IO-Link 1 R/W 1 byte UINT8(ENUM) No 0x01 (1) = Normal
Operation
Mode 2 R/W 1 byte UINT8(ENUM) No 0x01 (1) = Digital
Output
Pin 2 Digital Configuration
1)
0x0094
(148)
0 R/W 4 bytes Yes
Signal Source 1 R/W 2 bytes UINT16(ENUM) No 0x003A (58) =
LSSC1
Logic 2 R/W 1 byte UINT8(ENUM) No 0x00 (0) = Normal
Type 3 R/W 1 byte UINT8(ENUM) No 0x02 (2) = Push-
Pull
1)
The settings in the
digital configuration
are only used if the pin was configured as a digital output or digital input.
Tab. 7-12: Pin assignment – ISDU
7
System Functions (continued)
BOS R254K-UUI-RH10-S4
Photoelectric Sensors