7
7
E
Introduction
BIS C Identification Systems
Read/write heads
1)
Schematic
representation of an
identification system
(example)
1
) BIS C-3_ _ series, except BIS C-350 and -352
PROFIBUS-DP
Data carriers BIS C-1_ _-...
Processor BIS C-6022
Processor BIS C-6022
Configuration with
BIS C-6022
processor
C60_2-028_823024_0401-e.p65
8
8
E
Selecting System
Components
The
BIS C-6002
processor has a plastic housing. Depending on the version, connections are
made either through a terminal strip, with the cable secured using a PG fitting, or via round
connectors. A single read/write head from BIS C-65_ series can be directly mounted to the
processor, which creates a compact unit. If the BIS C-650 adapter is attached instead of the
BIS C-65_ read/write head, two read/write heads may be cable connected. If the BIS C-670
adapter is attached, one read/write head may be cable connected.
The
BIS C-6022
processor has a metal housing. Connection is made through round connec-
tors. Two read/write heads can be cable connected to the BIS C-6022 processor.
Series BIS C-60_2 processors have in addition a digital input. The input has various functions
depending on the configuration (see Parametering).
Whether the compact version of the processor with integrated read/write head makes sense
or whether the external solution is preferred depends primarily on the spatial arrangement of
the components. There are no functional limitations. All read/write heads are suitable for both
static and dynamic reading. Distance and relative velocity are based on which data carrier is
selected. Additional information on the read/write heads in series BIS C-65_ and series
BIS C-3_ _ including all the possible data carrier/read-write head combinations can be found
in the manuals for the respective read/write heads.
The system components are electrically supplied by the processor. The data carrier represents
an free-standing unit and needs no line-carried power. It receives its energy from the read/
write head. The latter constantly sends out a carrier signal which supplies the code head as
soon as the required distance between the two is reached. The read/write operation takes
place during this phase. Reading and writing may be dynamic or static.
BIS C-60_2 Processor
Basic knowledge for application
All manuals and user guides at all-guides.com
