21
21
E
Function Description
Output buffer, configuration and explanation
Description of
Output Buffer
(continued)
Sub-
Meaning
Function Description
address
02
Hex
Start address
Address at which reading from or writing to the data carrier begins
(Low Byte)
(the Low Byte includes the address range from 0 to 255).
(Das Low Byte deckt den Adressbereich von 0 bis 255 ab).
or:
Program No.
Number of the program to be stored in the EEPROM in
conjunction with command ID 06
Hex
for Mixed Data Access
function (values between 01
Hex
and 0A
Hex
are allowed!).
or:
Program No.
Number of the program stored in the EEPROM for read or write
operations in conjunction with command ID 22
Hex
or 22
Hex
for the
Mixed Data Access function.
or:
Initialization data
or:
Data
for writing to the data carrier
or:
Program data
for writing to the EEPROM.
or:
Parametering data for writing to the EEPROM.
03
Hex
Start address
Start address for reading from or writing to the data carrier (the High
(High Byte)
Byte is additionally used for the address range from 256 to 8,191)
or:
Initialization data
or:
Data
for writing to the data carrier
or:
Program data
for writing to the EEPROM.
or:
Parametering data for writing to the EEPROM.
(continued next )
Please note the
basic procedure on
16 and 30...34
and the examples
on pages
35...45.
C60_2-028_823024_0401-e.p65
22
22
E
Function Description
Output buffer, configuration and explanation
Description of
Output Buffer
(continued)
Sub-
Meaning
Function Description
address
04
Hex
No. of bytes
Number of bytes to read or write beginning with the start address
(Low Byte)
(the Low Byte includes from 1 to 256 bytes).
or:
Initialization data
or:
Data
for writing to the data carrier
or:
Program data
for writing to the EEPROM.
05
Hex
No. of bytes
Number of bytes to read or write beginning with the start address
(High Byte)
(the High Byte is additionally used for the range between 257 and
8,192 bytes).
or:
Initialization data
or:
Data
for writing to the data carrier
or:
Program data
for writing to the EEPROM.
06
Hex
Data
for writing to the data carrier
or:
Program data
for writing to the EEPROM.
...
Data
for writing to the data carrier
or:
Program data
for writing to the EEPROM.
Last byte
2nd Bit header
The data are valid if the 1st and 2nd bit header are identical.
or:
Data
for writing to the data carrier.
or:
Program data
for writing to the EEPROM.
Please note the
basic procedure on
16 and 30...34
and the examples
on pages
35...45.
All manuals and user guides at all-guides.com
all-guides.com
