![background image](http://html1.mh-extra.com/html/baldor/nextmove-pci/nextmove-pci_installation-manual_3560228079.webp)
Specifications 7-1
MN1903
7.1 Introduction
This section provides technical specifications of the NextMove PCI
7.1.1 Mechanical specifications
Description
Value
Input power
(from host PC)
+5V at 1200mA
±12V at 250mA
Additional current will be required when powering the
encoders from the host PC’s +5V supply.
Input power
(from customer supply)
+12V to +24V at 1200mA
Power consumption
15W (PCI card only)
Weight
Approximately 0.67lb (305g)
Nominal overall
dimensions
Standard 7in PCI card
175mm (6.875in) long x 106.7mm (4.2in) high.
Operating temperature
0 - 40°C (32 - 104°F) ambient
The host PC must have a spare 7 inch PCI card slot. Additional slots will be required to
accommodate expansion cards. The PC must be an AT type - the card cannot be fitted into
MCA type machines. The card dimensions conform to the PCI standard except that it cannot
be fitted with a Micro Channel bracket.
7.1.2 Analog inputs (X6)
Description
Unit
Value
Type
Single ended or differential
(software selectable)
Common mode voltage range
VDC
±10
Input impedance
k
Ω
>5
Input ADC resolution
bits
12
(includes sign bit)
Equivalent resolution
(±10V input)
mV
±4.9
Sampling interval
µ
s
400
7
Specifications
7
Summary of Contents for NextMove PCI
