Operation 5-31
MN1903
4. On the main menu, choose
File
,
Save File
. Locate a folder, enter a filename and click
Save
.
5.10.1Loading saved information
1. In the Toolbox, click the Edit & Debug icon.
2. On the main menu, choose
File
,
Open File...
Locate the file and click
Open
.
A Startup block should be included in every Mint program, so that whenever a program is
loaded and run the NextMove PCI will be correctly configured. Remember that every
drive/motor combination has a slightly different response. If the same program is used on
a different NextMove PCI installation, the Startup block will need to be changed.
Summary of Contents for NextMove PCI
