background image

2

3

TABLE OF CONTENTS

Introduction  . . . . . . . . . . . . . . . . . . . . . . . .3

Features And Functions   . . . . . . . . . . . . . . . .4

Key Charts  . . . . . . . . . . . . . . . . . . . . . . . . . .5

Installing Batteries  . . . . . . . . . . . . . . . . . . . .7

Programming TV Control  . . . . . . . . . . . . . . .8

Setup Codes for TVs  . . . . . . . . . . . . . . . . . . .8

Programming VCR Control  . . . . . . . . . . . . .12

Setup Codes for VCRs  . . . . . . . . . . . . . . . . .12

Programming Cable Converter
(or Satellite Receiver) Control  . . . . . . . . . .16

Setup Codes for Cable Converters  . . . . . . . .16

Setup Codes for Satellite Receivers  . . . . . . .18

Programming DVD Control  . . . . . . . . . . . . .18

Setup Codes for DVD Players  . . . . . . . . . . .19

Programming CD Control  . . . . . . . . . . . . . .20

Setup Codes for CD Players . . . . . . . . . . . . .21

Programming Audio Control  . . . . . . . . . . . .22

Setup Codes for Stereo Receivers  . . . . . . . .22

Setup Codes for Stereo Amplifiers  . . . . . . . .24

Searching For Your Code  . . . . . . . . . . . . . .25

Checking The Codes . . . . . . . . . . . . . . . . . .26

Reassigning Device Keys  . . . . . . . . . . . . . . .27

Setting Volume Lock . . . . . . . . . . . . . . . . . .28

To Change Volume Lock to the CBL/SAT Mode 28

To Change Volume Lock to the TV Mode  . . .28

To Change Volume Lock to the VCR Mode  . .28

To Change Volume Lock to the DVD Mode  . .28

To Change Volume Lock to the CD Mode  . . .29

To Change Volume Lock to the RCVR Mode  .29

Clearing Volume Lock  . . . . . . . . . . . . . . . .29

Clearing Volume Lock For One Device  . . . . .29

Using the Learning Feature  . . . . . . . . . . . . .30

Feature Reset . . . . . . . . . . . . . . . . . . . . . . .31

Using the IR/RF Command Center  . . . . . . . .32

Specifications  . . . . . . . . . . . . . . . . . . . . . .34

Compliance with FCC Rules and Regulations 35

Troubleshooting . . . . . . . . . . . . . . . . . . . . .36

INTRODUCTION

The Universal Dolphin™ Remote is Balboa’s latest
generation remote control. It is designed with
sophisticated technology that will allow you to 
consolidate many of your existing remote controls
along with the entertainment system in your spa.
It’s packed with easy-to-use features such as:

• Preprogrammed to operate the cable converter

supplied by your cable system provider

• Preprogrammed technology for easy setup

•  Color-coded keys to quickly locate popular

functions

•  Code library for video and audio components

•  Code Search to help program control of 

older components

•  Learning function to allow programming with

another infrared (IR) remote

•  Combination IR and RF (radio frequency)

capability that can send commands through 
the optional RF base station to devices in 
your house.

Before you can use your new remote control, you
will need to program it to operate the specific
home entertainment components you wish to
control. Follow the instructions detailed in this
manual to set up your Dolphin Remote and enjoy
your new remote control.

IMPORTANT

Remote should be stored outside of spa when
not in use. Donot store in direct sunlight.

Avery Label 

#5190

or

World Label 

#WL-800WX

#WL-775WX

Summary of Contents for Dolphin




















Reviews: